AIMDROIX EVO ONE Y6
The AIMDROIX EVO ONE is the ultimate airframe for endurance FPV and aerial videography. The goal of this frame design was to provide a large battery load capacity, vibration isolated plates for the cameras, camera location out of the props view while positioning the CG as close to the center as possible, and in a low profile package. With this in mind, a high stiffness frame was developed by using the exclusive aluminum beam stiffeners and an integrated aluminum landing gear frame. As an AIMDROIX signature, CNC aluminum parts are all around the frame giving the frame its distinctive look and performance of AIMDROIX.
The frame was designed to be as customizable as possible so that it could be built in many different multirotor configurations. The default frame configuration is a Y6 but it can be built as a quad, quad X8, Y4, V- tail quad and tricopter. This is possible by just installing the optional configuration kits sold separately.
The top and bottom plate are stiffened with an innovative aluminum beam stiffeners, which increase the stiffness of the frame plates without the need of standoffs or sandwiched plates. This maximizes the space between the top and bottom plates for a better placement of the ESC and batteries. The integrated landing gear increases the stiffness of the bottom plate and allows two high capacity batteries to be mounted on the sides of the frame. The height of the landing gear can be easily changed by replacing the 8mm carbon fiber leg tubes.
The innovative camera mounting system was designed to provide vibration isolation for the camera and video transmitter electronics. The camera plate is mounted on 6 AIMDROIX soft dampers that the takes away the vibrations from the props and motors. The rear support dampening balls are mounted on the top plate brackets so that they are in compression load. This allowed mounting the camera gimbal and FPV camera on front of the plate, away from the top and bottom props view and maintain the plate parallel with respect to the frame plates. The plate was designed to fit the Feiyu Tech FY-G3 brushless gimbal without modifications.
The frame was designed to fit the AIMDROIX aluminum arms that have been well proven for many customers around the world. With the optional AIMDROIX arms accessories, it possible to build the most versatile multirotor frame in the market.
-Innovative vibration isolated camera system.
-CNC machined aluminum parts
-Extruded carbon fiber and aluminum landing gear
-Configurations; Y6, Quad X4, Quad X8, Y4, V- tail Quad, and Tricopter
in a quad configuration.
-Smart battery stopper.
-No standoffs or sandwiched plates design.
-Low profile design for pancake type motors
- Frame size: 610mm (with extended length arms)
-Max props size:16in on top motor / 15in props on lower motor.
-1.5mm and 2mm G10 plates. (Optional 1.5mm Carbon fiber plates)
-Aprox frame weight: 670g (with V1.5 extended aluminum arms)
- Battery space between plates: 160 x 50mm x 40xmm (LxWxH)
- Large battery capacity under the bottom plate, up to 180mm x105mmx 60mm (LxWxH). Enough for 6s high capacity batteries for extreme endurance flights.
-AIMDROIX Aluminum arms
-AIMDROIX Coaxial motor mounts
-AIMDROIX single piece arm spacer
-AIMDROIX single piece arm spacer
-AIMDROIX coaxial motor mount kit
-V2 AIMDROIX aluminum arms. *Pictures show V1.5 arms*